At Same Time As doing a little bathroom renovations, I scratched my ceramic tile with the carbide drill bit I was using to drill across it. What can I do to erase the scratch? I’ve already tried acetone, rubbing alcohol, abrasive bleach cleaning solution (Comet), and numerous rags, pads, toothbrushes, e
more
$5.99
Product Description:
/ b> MedlinePlus Drill glass, marble, masonry, stone, concrete etc.. . Drill glass, marble, masonry, stone, concrete and nearly anything you need! Super task diamond cover on high speed nickel plated steel will provide you wonderful results even in semi-precious stones. Flutel
more
$44.95
Product Description:
/ b> Instance of 5 KERAMIK Bits – N ยบ 151 250 410 The KERAMIK drill has a carbide point extremely tough and sharp, diamond-land tungsten – titanium, with a hardness of level of 9. Low temperature soldering of high electric tension to 1120 degrees Celsius to apar
more
I need to drill anthing from a 1/4″ to 4 1/2″ hole. I’ve used diamond tipped bits…These are rich and get a lot of time. I’ve also used that water as a coolant and lubricant.
Is there a bit that’s made simply for drilling ceramic tile that i’ve not found?
Ceramic Drill
more
I am new to working with stained glass and the specific glass saws are very expensive.Anyone know if a diamond blade can be found for a standard band saw, Ryobi, etc that you could use to cut glass ? Thanks !!
more
I have a 24 inch granite tile and should be reduced to a round stainless steel sink above it.The sink is about 16 inches in diameter. What tool and how to cut granite?
more
I’ve already morted it on the wall and my brother-in-law cut it mistaken and wants to attempt this. My die grinder burned up with a diamond tip.
more
Filed
under:
Diamond Grinder
Tags: angle, Cutting, grinder, metal, need, round, some, this, tile, with.
December 1, 2009 at 03:47